Choose an entry by using the arrow keys or type in 
 some of the entry's name.
 Press ENTER to amend the details in the entry.
 Use the arrow keys to highlight your choice. 
 Press ENTER to confirm that choice.
 Telephony (Speech):
Single Side Band, suppressed carrier (SSB)
J3E  
Frequency Modulation (FM)
F3E  
Phase Modulation (PM)
 "G3E  
Amplitude Modulation (AM)
A3E  
 Morse:
Hand sent, on/off keying of the carrier
A1A  
Hand sent, on/off keying of the audio tone (FM)
F2A  
Automatic reception, on/off keying of carrier
A1B  
 RTTY/AMTOR:
Direct Frequency shift keying of the carrier
F1B  
Frequency shift keyed audio tone (FM transmitter)
F2B  
Frequency shift keyed audio tone (SSB transmitter)
J2B  
 Packet/Data:
Direct frequency shift keying of the carrier
F1D  
Frequency shift keyed audio tone (FM transmitter)
F2D  
Frequency shift keyed audio tone (SSB transmitter)
J2D  
 Television:
Vestigial sideband (AM transmitter)
C3F  
Slow scan television (SSB transmitter)
J2F  
 Facsimile:
Frequency shift keyed audio tone (SSB transmitter)
J2C  
 Q Codes are 3 letter codes used by radio operators to provide 
 information on such things as location and signal strength.
 QRM is interference by other stations.
 QRN is natural interference.
 QSB indicates signal fading.
 Use the arrow keys to highlight your choice. 
 Press ENTER to confirm that choice.
 The log number will be created automatically, starting from 1, unless  
 you enter a different start number.
 Date and start time must be entered.
 Mode can be chosen from a lookup table or you can enter it manually.
 To choose from the lookup table, type in one or more letters and press 
 the ENTER key.
 E.R.P. is effective radiated power.
 You can show up to four stations worked. The program requires you to
 enter at least one station worked - if there are no other stations,
 press the ENTER key to take you to reports sent and received.
 Select Yes or NO for QSL sent by using the arrow keys and pressing
 the ENTER key. Do the same for whether the QSL was sent direct or
 via a bureau.
 The end time must be entered.
 To enter a country or continent, type in one or more
 letters and press ENTER.
 If this is the first time you've used this part, you'll
 be given a blank screen to enter whatever you decide.
 If you've already entered a country or continent, then
 you will be given a list to choose from. Use the arrow
 keys to choose the correct type or press INS to insert
 a new country or continent.
 To enter a mode, type in one or more letters and
 press ENTER.
 If this is the first time you've used this part, you'll
 be given a blank screen to enter whatever you decide.
 If you've already entered a mode (or if you've kept the
 list supplied with the program) then you will be given a  
 list to choose from. Use the arrow keys to choose the
 correct type or press INS to insert a new mode.
!AMEND   
MAIN    
MODES   
Q_CODE  
SELECT  `
UPDATE   	
UPD_CONTT
UPD_MODE